30 000$ CAD / 20 810$ USD
Nouvel ajout
Very nice 1025R with 120R Loader, Bucket and AP10 Pallet Forks. 60" Autoconnect Mower Deck. Only 92 hours. -- Transmission: HydroMid Mount Mower: YesCab: No Cab60" Drive over mower deckFront Axle: MFWDLoader: YesBucket & Pallet forksJoystick loader controlsThree point hitch
645 000$ CAD / 447 420$ USD
Nouvel ajout
Kernel Processor included, PRWDHARVEST LAB 30002018 JOHN DEERE 659 PICKUP SIN 1KM0659GKHJ131263 (NEW WITH THE CHOPPER), RECEIVER NOT INCLUDED -- RECEIVER NOT INCLUDEDHARVEST LAB 30002018 JOHN DEERE 659 PICKUP SIN 1KM0659GKHJ131263 (NEW WITH THE CHOPPER)Kernel Processor: YesAxle: No PRWD
63 000$ CAD / 43 701$ USD
Kello-Bilt 325 - 16' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: 3/8 32" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build fro
63 000$ CAD / 43 701$ USD
Kello-Bilt 325 - 16' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: 3/8 32" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build fro
127 800$ CAD / 88 652$ USD
Features of Kello-Bilt Tandem Disc Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricated as a single piece of steel for maximum stability. There are no U-Bolts to become stretched and loosened that can cause disc assemblies or bearing failure. Heavy Duty Construction: Assembly is done with Grade 8 Zinc-Plated bolts and hardware, and constructed with 6” by 4” by 3/8” thick high strength steel tube. Frames are fully welded and reinforced to withstand acres of rough use. Crafted In Canada: Manufactured in Red Deer County, Alberta.
Contactez le concessionnaire pour le prix
Enduraplas Def Fuel Boss Available in 25, 50 and 100 Gallon The Fuel Boss® pickup-mounted refueling unit comes ready-to-use with a pump, gun, and auto shut-off nozzle. Diesel and DEF models help you keep your equipment in the field with minimal downtime. And thanks to their easy-lift handles, these units don’t tie up your bed space when you don’t need them. Delivery options are available, ask your salesperson for details. Finance and lease options available OAC.Prices are subject to applicable taxes.
218 700$ CAD / 151 706$ USD
Wishek 34' 842 LNT Tandem Disc Need to break up land? The Wishek offset disc has the heaviest weight-per-blade specifications in the agriculture industry. This allows discs to work in almost all soil conditions and crop residue. Features 10 Bolt Hubs Safety Chain 4" x 8" x 3/8" Tubular Frame Solid Mount Scrapers Spring Cushion Gangs Gang Angle Adjustment 11" Blade Spacing Light Kit Scraper Upgrade Hydraulic Leveler Gang Bolt Wrench Specs 33' 2" Cutting Width 15' 9" Transport Width 14' 1" Transport Height 509 lbs/blade 1,135 lbs/foot 37,737 lbs 30" Smooth Blades 341–445 Required HP Delivery options are available, ask your salesperson for details. Finance and lease options available OAC.Prices are subject to applicable taxes.
Contactez le concessionnaire pour le prix
Enduraplas Def Fuel Boss Available in 25, 50 and 100 Gallon The Fuel Boss® pickup-mounted refueling unit comes ready-to-use with a pump, gun, and auto shut-off nozzle. Diesel and DEF models help you keep your equipment in the field with minimal downtime. And thanks to their easy-lift handles, these units don’t tie up your bed space when you don’t need them. Delivery options are available, ask your salesperson for details. Finance and lease options available OAC.Prices are subject to applicable taxes.
218 700$ CAD / 151 706$ USD
Wishek 34' 842 LNT Tandem Disc Need to break up land? The Wishek offset disc has the heaviest weight-per-blade specifications in the agriculture industry. This allows discs to work in almost all soil conditions and crop residue. Features 10 Bolt Hubs Safety Chain 4" x 8" x 3/8" Tubular Frame Solid Mount Scrapers Spring Cushion Gangs Gang Angle Adjustment 11" Blade Spacing Light Kit Scraper Upgrade Hydraulic Leveler Gang Bolt Wrench Specs 33' 2" Cutting Width 15' 9" Transport Width 14' 1" Transport Height 509 lbs/blade 1,135 lbs/foot 37,737 lbs 30" Smooth Blades 341–445 Required HP Delivery options are available, ask your salesperson for details. Finance and lease options available OAC.Prices are subject to applicable taxes.
Contactez le concessionnaire pour le prix
Schulte RW-1935 Spartan Rock Picker Windrower Remove rocks in one pass, with one operator driving one tractor. The Schulte RW-1935 Spartan is a rock picker and windrower in one. It starts with two side windrowers powered by chain drive and hydraulic motors. Floating on durable castor tires, they can adjust on the fly to provide up to 19’ of picking width. The windrower teeth dig down to a depth of 4.25”, dislodging rocks sized from 2” to 27”. These stones are windrowed to the centre of your unit, where the trailing rock picker devours them. Its 3.5 cubic-yard hopper can be raised to a dumping height of 8’7”, where soil is easily sifted out through rear and bottom grates. The result is a clean field ready for seeding and an equally clean rock pile. Features On-the-fly working width adjustment from 16’ to 19’ Adjustable working depths down to 4.25” help dig up partially exposed stones Strong, durable, proven hard surfaced teeth and batt reels make it easy to pick rocks from 2” to 27”. Large, 3.5 cubic yard bucket and a 8’ 7” dumping height facilitate loading truck boxes and building high rock piles. Separate hydraulic adjustment of windrower and reel speeds to set up custom windrowing and picking Spring-loaded 450 BNH batts and 1.5” spaced T-Iron g
Contactez le concessionnaire pour le prix
Schulte RW-1935 Spartan Rock Picker Windrower Remove rocks in one pass, with one operator driving one tractor. The Schulte RW-1935 Spartan is a rock picker and windrower in one. It starts with two side windrowers powered by chain drive and hydraulic motors. Floating on durable castor tires, they can adjust on the fly to provide up to 19’ of picking width. The windrower teeth dig down to a depth of 4.25”, dislodging rocks sized from 2” to 27”. These stones are windrowed to the centre of your unit, where the trailing rock picker devours them. Its 3.5 cubic-yard hopper can be raised to a dumping height of 8’7”, where soil is easily sifted out through rear and bottom grates. The result is a clean field ready for seeding and an equally clean rock pile. Features On-the-fly working width adjustment from 16’ to 19’ Adjustable working depths down to 4.25” help dig up partially exposed stones Strong, durable, proven hard surfaced teeth and batt reels make it easy to pick rocks from 2” to 27”. Large, 3.5 cubic yard bucket and a 8’ 7” dumping height facilitate loading truck boxes and building high rock piles. Separate hydraulic adjustment of windrower and reel speeds to set up custom windrowing and picking Spring-loaded 450 BNH batts and 1.5” spaced T-Iron g
105 000$ CAD
Please Call for Machine Availability & Location; 18.4R38 --%; 14.9R28 --%; Auto Command CVT; 4 hyd valves; 540/1000 pto; 3pt hitch; IntelliView IV monitor; rear weights.
