Contactez le concessionnaire pour le prix
540cuft,445/50R22.5 singles,3 point scale,50"conveyor, 120" load height,1000 rpm, 1/2"AR200 steel screw with 7 knives, 5/8" floor thickness,chain bale containment kit.
Contactez le concessionnaire pour le prix
Vermeer 605N Select - Net/Twine
59 900$ CAD / 42 755$ USD
Vermeer 605N Select - Net
29 900$ CAD / 21 342$ USD
Vermeer 605SM - Net/Twine
67 000$ CAD / 47 823$ USD
2021 Vermeer 605N Round Baler. 7,006 bale count.
Contactez le concessionnaire pour le prix
DEMO
In stock,hyd suspension,reversing p/u,auto lube,zero turn.
45 000$ CAD / 32 120$ USD
14.5ft cut,drawbar pull,steel conditioner,1000pto,big tires.
55 340$ CAD / 39 500$ USD
2021 Vermeer 605N Select. Very well maintained and always shedded. Both Twine and Surface Wrap PTO: 1000 Width of Bale: 5 Feet, Bale Kicker, Twine Wrap, Net Wrap Lighted Net Wrap Compartment, Wide Pickup -- Wrapping: Both Twine and Surface WrapBale Kicker, Twine Wrap, Net WrapWidth of Bale: 5 FeetPTO: 1000Lighted Net Wrap Compartment, Wide Pickup
Contactez le concessionnaire pour le prix
DEMO
Full warranty , demo unit, low rate financing available
43 900$ CAD / 31 335$ USD
Twine / Net Wrap; Pickup Clutch; Moisture Sensor; 1000 PTO; 21.5-16.1 Tires; Wide Pickup; 10,566 Bales -- 10566 bales
Contactez le concessionnaire pour le prix
The BPX9010 bale processor combines simplicity, durability 4 and versatility. Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Spread bedding with consistency at ranges of up to 50 ft (15.2 m) The rotor cleaner attachment can be moved on the cut control bars to help reduce excessive net and twine on the rotor. Operators can access the rotor from the left side of the machine by simply opening the door. The slat-and-chain bale rotation design feeds bales consistently into the rotor — reducing the need to reverse rotation. Heavy-duty sprockets and chains allow misshaped bales to be processed smoothly. Split shafts let operators perform maintenance without removing the entire bed. The toolless cut control bar design allows dual adjustments to be made for increased aggression and is accessible from outside the machine. Ten different settings allow operators to be in control of processing speed and material size.
