56 500$ CAD / 41 271$ USD
*New Schulte XH1500 Series 5 Upgrade 15' Cutter (Light kit, wing walking axles, skid steer tires) Ask your salesperson about stock with alternate options. *Pre-Selling New, Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft, Extra heavy duty 275hp divider box Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines New high-torque wing clutches ensure better performance in rough cutting All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1/4″ diameter pins for strength Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck Tandem walking axles result in smooth operation over rough surfaces Increased ground clearance and a cutting chamber depth of 15 3/8” (2″ greater than the Series 4) and an increased blade tip speed, result in an unsurpassed material flow with improved cutting speed Extra large 10.5 X 27 skid steer tires, allow for greater transport height along with improved performance in wet conditions (other options availab
56 500$ CAD / 41 271$ USD
*New Schulte XH1500 Series 5 Upgrade 15' Cutter (Light kit, wing walking axles, skid steer tires) Ask your salesperson about stock with alternate options. *Pre-Selling New, Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft, Extra heavy duty 275hp divider box Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines New high-torque wing clutches ensure better performance in rough cutting All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1/4″ diameter pins for strength Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck Tandem walking axles result in smooth operation over rough surfaces Increased ground clearance and a cutting chamber depth of 15 3/8” (2″ greater than the Series 4) and an increased blade tip speed, result in an unsurpassed material flow with improved cutting speed Extra large 10.5 X 27 skid steer tires, allow for greater transport height along with improved performance
119 900$ CAD / 87 582$ USD
2021 36' Schulte DHX-360 Disc Harrow Professional producers require equipment that can manage increased straw and chaff loads post-harvest, increase water penetration, quicken soil warming and promote weed seed germination for a proper pre-seed burn-off operation. DHX-360 does all that with its double row of wavy coulters and five bar heavy harrow. The coulters engage the ground sizing the straw and mixing the chaff within the top layer of soil. The heavy harrow evenly distributes, levels and breaks up residue that is discharged by the coulters. The DHX-360 is the evolution of the heavy harrow, the next level of performance for post harvest and pre-seeding. Working Width, 36 ft Transport Width, 15.25 ft Transport Height, 14.5 ft Transport Length, 33.5 ft Weight, 25,000 lbs Number of Disc/Harrow Sections, 3 Width of Sections, 12 ft Rows of Discs, 2 Size of Discs, 18” Width of discs, 2.25" Type of Disc, Straight, 8 wave Disc Spacing, 7.2” Disc Shank,1/2” x 4” Disc Hub, 4 bolt, sealed Harrow Layout, 5 bar Harrow Tyne, 5/8” x 26” with tip Tires, 560/ 45R 22.5 Radials
16 900$ CAD / 12 345$ USD
Schulte SDX-102 Snow Blower *Old Stock Clearance Special The Schulte SDX-102 is a 102” wide tractor snow blower that's perfect for all your snow blowing needs such as: yard clearing, clearing around bins or blowing beside grain bags. It's also great for cities and municipalities because of the tough build, and is often used for truck loading, clearing acreage lanes, contractors use them for clearing ditches and oil roads, etc. This snow blower is ideally suited to 85-140 HP tractors.SPECS: Cutting Width: 102" Cutting Height: 35" Auger Diameter: 23" Hitch Type: Cat II, Cat II quick hitch PTO Speed: 540 RPM Capacity - Dry Snow / Wet Snow: 388 tons/hr / 1222 tons/hr Fan Type: 4 paddle Weight: 1675lbs Auger Drive Chain: #80 HP Requirements: 85-140 HP Deliveries are available, ask your salesperson for details.Prices are subject to applicable taxes.
47 500$ CAD / 34 697$ USD
Schulte RS320 Conveyor Jumbo Rock Picker *Pre-Selling Extra large 3.2 cubic yard (2.43 m3) hopper Hydraulic drive Continuous conveyor style pickup Fully grated hopper bottom Wht: 5522 lbs. (2450 kg) 75 HP min Surface rock from 2 to 28 inch diameter 50% less trash then reel type The Schulte RS320 Rock Picker features an extra large 3.2 cubic yard (2.43 m3) hopper for increased rock removal efficiency. The RS320's hopper has twice the capacity of an average rock picker hopper. This ensures that more time is spent picking rocks and less time traveling to the dump point. The RS320's new T-iron tapered grate with 3/4” bottom and 1/2” top material virtually eliminates all small rock jamming. And the 48" grate which is 17" longer than most reel type rock pickers on the market picks 50% less dirt and trash than reel types because it allows more time to sift the soil out before the rock enters the bucket. Large, flotation type, all weather 16.5L x 16.1 tires are mounted on high capacity eight bolt wheels and hubs.Financing and Leasing Available OAC.Deliveries are available, ask your salesperson for details.Prices are subject to applicable taxes.
156 500$ CAD / 114 317$ USD
36' Schulte DHX-360 Disc Harrow *Pre-Selling Professional producers require equipment that can manage increased straw and chaff loads post-harvest, increase water penetration, quicken soil warming and promote weed seed germination for a proper pre-seed burn-off operation. DHX-360 does all that with its double row of wavy coulters and five bar heavy harrow. The coulters engage the ground sizing the straw and mixing the chaff within the top layer of soil. The heavy harrow evenly distributes, levels and breaks up residue that is discharged by the coulters. The DHX-360 is the evolution of the heavy harrow, the next level of performance for post harvest and pre-seeding. Working Width, 36 ft Transport Width, 15.25 ft Transport Height, 14.5 ft Transport Length, 33.5 ft Weight, 25,000 lbs Number of Disc/Harrow Sections, 3 Width of Sections, 12 ft Rows of Discs, 2 Size of Discs, 18” Width of discs, 2.25" Type of Disc, Straight, 8 wave Disc Spacing, 7.2” Disc Shank,1/2” x 4” Disc Hub, 4 bolt, sealed Harrow Layout, 5 bar Harrow Tyne, 5/8” x 26” with tip Tires, 560/ 45R 22.5 Radials
35 500$ CAD / 25 931$ USD
Schulte 15' GX-150 Rotary Cutter Looking for a rotary cutter to take on your agricultural and commercial challenges? Schulte offers two best-in-class mowers, now available at Flaman Ag. Both the GX-150 embody Schulte's Heavy-duty construction and reliable performance. Designed and built in Canada for tough prairie-province land clearing, these rugged 15’ mowers chew up acres of grass and tall brush over rough, uneven terrain. Their flex-wing design and three cutting rotors clear long grass from fields and ditches, giving you an unobstructed view of highway approaches. A “Best in Class” drive system, General duty 15 foot flex wing rotary mower A single domed 10 gauge continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm and the 1000 rpm is a category 5. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut A four-gearbox drive line with independent slip clutches Deck
56 500$ CAD / 41 271$ USD
New Schulte XH1500 Series 5 Upgrade 15' Cutter (Light kit, Walking Center Axles, 26" Laminate Tires) Ask your salesperson about stock on order with alternate options walking wing axles (*Pre-Selling) New, Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft, Extra heavy duty 275hp divider box Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines New high-torque wing clutches ensure better performance in rough cutting All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1/4″ diameter pins for strength Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck Tandem walking axles result in smooth operation over rough surfaces Increased ground clearance and a cutting chamber depth of 15 3/8” (2″ greater than the Series 4) and an increased blade tip speed, result in an unsurpassed material flow with improved cutting speed Extra large 10.5 X 27 skid steer tires, allow for greater transport height along with improved performance in wet conditio
56 500$ CAD / 41 271$ USD
*New Schulte XH1500 Series 5 Upgrade 15' Cutter (Light kit, walking center axles, skid steer tires) Ask your salesperson about stock with alternate options with walking wing axle. (*Pre-Selling) New, Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft, Extra heavy duty 275hp divider box Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines New high-torque wing clutches ensure better performance in rough cutting All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1/4″ diameter pins for strength Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck Tandem walking axles result in smooth operation over rough surfaces Increased ground clearance and a cutting chamber depth of 15 3/8” (2″ greater than the Series 4) and an increased blade tip speed, result in an unsurpassed material flow with improved cutting speed Extra large 10.5 X 27 skid steer tires, allow for greater transport height along with improved performance in wet conditions (othe
Contactez le concessionnaire pour le prix
*Pre-Selling. Schulte’s SDX-117 Snow Blower incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market. On the SDX-117, a 1000 RPM gear driven drive system is standard. A size 8 Bondioli power shaft is included with shear pin protection to power the blower. A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease. A 300 Degree rotating chute with double deflector reduces blowback when placed in down position Three position adjustable stake arms Cutting Width: 117”Tractor Horsepower: 140 - 220 HPCutting Height: 45 1/2”Weight (approximate): 2750 lbsPTO Speed: 1000 RPMCapacity - Dry snow: 762 tons/hrCapacity - Wet snow: 2394 tons/hr Prices are subject to applicable taxes.
Contactez le concessionnaire pour le prix
Schulte’s SDX-117 Snow Blower incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market. On the SDX-117, a 1000 RPM gear driven drive system is standard. A size 8 Bondioli power shaft is included with shear pin protection to power the blower. A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease. Cutting Width: 117” Tractor Horsepower: 140 - 220 HP Cutting Height: 45 1/2” Weight (approximate): 2750 lbs PTO Speed: 1000 RPM Capacity - Dry snow: 762 tons/hr Capacity - Wet snow: 2394 tons/hr Financing and Leasing OAC! Prices are subject to applicable taxes.
16 900$ CAD / 12 345$ USD
Schulte SDX-102 Snow Blower *This unit SN#84212 clearance special, Save $1000 compared to new price* The Schulte SDX-102 is a 102” wide tractor snow blower that's perfect for all your snow blowing needs such as: yard clearing, clearing around bins or blowing beside grain bags. It's also great for cities and municipalities because of the tough build, and is often used for truck loading, clearing acreage lanes, contractors use them for clearing ditches and oil roads, etc. This snow blower is ideally suited to 85-140 HP tractors.SPECS: Cutting Width: 102" Cutting Height: 35" Auger Diameter: 23" Hitch Type: Cat II, Cat II quick hitch PTO Speed: 540 RPM Capacity - Dry Snow / Wet Snow: 388 tons/hr / 1222 tons/hr Fan Type: 4 paddle Weight: 1675lbs Auger Drive Chain: #80 HP Requirements: 85-140 HP Deliveries are available, ask your salesperson for details.Prices are subject to applicable taxes.
