11 949$ CAD / 8 290$ USD
RB2408 - 8 FT. HEAVY PLUS REAR BLADE - Rear Blade - Base: 1331XF - Hitch: 3 Point Category II, III and ASAE Quick Coupler Category II, III - Tractor Horsepower: 160 Horsepower (Maximum 2WD) or 145 Horsepower (Maximum 4WD) - Tilt: 2 Positions, Up to 15 Degrees, Up or Down - Offset: 0 Inches to 28 Inches Right, 0 Inches to 26 Inches Left - Moldboard Thickness: 5/16 Inch - Moldboard Length: 96 Inches - Moldboard Height: 19 Inches - Duty: Heavy Duty Plus - Cutting Edge: 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 1,451 Pounds - Angle: 360 Degrees - Angle Forward: 4 Positions, Up to 26 Degrees Right, 5 Positions, Up to 38 Degrees Left - Angle Reverse: 4 Positions, Up to 26 Degrees Right, 5 Positions, Up to 38 Degrees Left - Parking Stand: Standard - Hydraulic Angle, Tilt and Offset Kit (1010) -- 8 Ft Working Width3 Point MountCategory II, III
7 207$ CAD / 5 000$ USD
AV50G - 84" ROOT RAKE GRAPPLE -- 84" ROOT RAKE GRAPPLE
2 652$ CAD / 1 840$ USD
Pallet Fork - Base: 2154XF - (2) 1.57 Inches x 5.12 Inches Solid Tines - Fits John Deere 600, 700, Global, and 800 Series Loaders - Load Rating: 5,500 Pounds - Dimensions: 37 Inches High x 60 Inches Wide x 54 Inches Long - Operational Weight: 456 Pounds - 48 Inch Fixed Pallet Tines - Operational Weight: 476 Pounds -- 456 Pound Operational Weight48 Inch
1 168$ CAD / 810,00$ USD
Box Blade - Base: 1742XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 60 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 405 Pounds - Warranty: 1 Year -- New60" Working Width3 Point
49 057$ CAD / 33 870$ USD
TD3427 HAY TEDDER -- TD3427 HAY TEDDER
49 057$ CAD / 33 870$ USD
TD3427 HAY TEDDER -- TD3427 HAY TEDDER
48 681$ CAD / 33 610$ USD
TD3427 HAY TEDDER -- TD3427 HAY TEDDER
1 782$ CAD / 1 230$ USD
Broadcast Spreader - Base: 3072XF - Hopper Material: Polyethylene - Hopper Weight Capacity: 678 Pounds - Hopper Volume Capacity: 10.6 Cubic Feet + Machine Weight: 125 Pounds - Swath Spread: 46 Feet - Hopper Width: 42 Inches - Hopper Height: 40 Inches - Tractor PTO Horsepower Range: 16 to 55 - PTO RPM: 540 RPM - PTO Shaft Category I (Heavy Duty Shielded 1 3/8 Inches) 3 Point Hitch: Category 1 - iMatch Hitch Compatible (1000)
44 596$ CAD / 30 790$ USD
Hay Tedder - Base: 0341XF - 26 Foot, 4 Inch Working Width - 10/2 Turbo Tines are Designed for Clean and Efficient Tedding - Radial Pin Clutch - 540 RPM PTO Shaft - Fully Enclosed Oil Bath Gearboxes - Finger Joints at Wing Pivot Points - Standard Hydraulic Lift and Tilt - Transport Lights, SMV, and Safety Tow Chain - 1 Year Parts and Labor Warranty
1 796$ CAD / 1 240$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
1 340$ CAD / 930,00$ USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year -- Five Foot Working Width
1 153$ CAD / 800,00$ USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year -- Five Foot Working Width
