Contactez le concessionnaire pour le prix
The revolutionary KA160 Power Blower features a vertical shaft design that delivers a powerful, yet quiet performance. The blower can be used to remove leaves, light snow, water, etc. The blower housing can be rotated 180 degrees with the standard hydraulic motor. This allows the operator to move debris in the desired direction without hindering operation. Two gauge wheels maintain a consistent distance from the surface.
Contactez le concessionnaire pour le prix
The KJ520 Narrow Broom is designed for sweeping and removal of material such as snow, leaves, dirt, light gravel, and even thatch. It is designed to fit narrow walkways, operational on a 48in walk. The KJ520 Broom can be hydraulically angled left or right and lifted up or down all with the S.D.L.A. Controls. An optional electric actuator allows the operator to adjust the speed and direction of the broom rotation, maximizing effectiveness and allowing the operator to reverse broom rotation, all from the seat of the tractor.
Contactez le concessionnaire pour le prix
Ventrac Snow Blowers are built for commercial snow clearing operations of sidewalks, driveways, and other areas. Available in width options of 48" and 52", these two stage snow blowers feature a 16" diameter solid auger for best snow transfer, a large 20" diameter fan, and the ability to launch snow at distances up to 40 feet. Standard features include adjustable cast iron skid shoe discs at the rear, high carbon hardened steel shoes at the side, and a reversible high carbon hardened steel cutting edge. The hydraulically activated discharge chute can rotate 180 degrees, all from the convenience of the operator’s seat, using Ventrac's exclusive S.D.L.A. control system. Chute deflection is manually adjustable and an electric chute deflection controller is optional.
Contactez le concessionnaire pour le prix
The Ventrac ET202 makes quick work of any clean up job. The Turbine Style Blower is designed to blow large volumes of air, and is much quieter than a conventional leaf blower. The ET202 can be used to blow leaves, light snow, and remove debris from sidewalks, parking lots and other areas. The ET202 Turbine Style Blower's powerful front discharge nozzle can be hydraulically rotated 360 degrees from the comfort of the operator's seat. The front bumper protects the nozzle from damage. Power and control allow you to move through your clean up work simply, quietly, and efficiently. The Ventrac Mount System allows you to get attached quickly, and move on to the next job.
Contactez le concessionnaire pour le prix
The 55 inch Ventrac KV552 V-Blade Snow Plow maximizes efficiency with the ability to quickly change from V plow to Scoop to straight blade, all from the convenience of Ventrac's exclusive S.D.L.A. control system. With a 48" V width, the KV552 is ideal for walks and areas that larger blades are unable to plow. Standard features include hydraulically activated wing cylinders, mechanical trip, adjustable cast iron skid shoe discs, reversible high carbon hardened steel cutting edges, and a center shoe for gliding over rough terrain. Pivot points are fully greasable to ensure proper operation, even in the worst environments. The KV552 V-Blade fits Ventrac 3000 and 4000 series tractors, and requires the 12V switch and plug kit.
Contactez le concessionnaire pour le prix
Ventrac Power Buckets are a must for any Ventrac owner. The power buckets are great for transporting material such as soil, sand, gravel, mulch, debris, snow, and much more. Used for landscaping, excavation, back-filling, leveling, digging and grading, the Power Buckets are an indispensable attachment from construction sites to your own backyard, allowing you to say goodbye to your old wheelbarrow. Ventrac Power Buckets are hydraulically controlled from the driver's seat, allowing for smooth, effortless operation. The Power Bucket is designed to sit upright after detachment, with the lift arms in the proper position for direct reconnect when the bucket is used again. The Power Bucket attaches with the Ventrac Mount System, allowing for attachment changes in a snap.
Contactez le concessionnaire pour le prix
The KG540 Power Rake is the ultimate tool for reshaping uneven ground and preparing dirt for new lawn installations. For easy ground prep on yard installations, this robust machine is best at removing surface rocks and debris, creating a level, prepped finish for seeding. The compact design of the tractor and attachment allows the operator to work in tight quarters where it is difficult for other machines to navigate. Refreshing a gravel driveway is one task where the Power Rake excels by bringing old gravel back to the surface for a fresh gravel finish. Several features enhance the KG540 Power Rake including a hydraulic height adjustment that allows precise control from the driver’s seat. Additional features include a pivoting front axle to assist in self-leveling. The option to remove the axle provides the ability to work up closer to structures. Powering the action of the KG540 Power Rake are seventy-two replaceable carbide tips that pulverize and refine the soil. The reversible drum can carry soil or stone forward or backwards to allow for forward motion or back-dragging of materials while adjustable wings help control the routing of materials or debris.
Contactez le concessionnaire pour le prix
The DC520 Soil Cultivator prepares bare soil by cultivating a soft and uniform seedbed for the best possible direct-seeding results. This attachment works well to recondition hard, compacted soil into a better surface for more successful and consistent germination rates. The Soil Cultivator consists of 4 main components that work simultaneously to process high volumes of soil and provide the ultimate seedbed. Cultivator Tines start by pulverizing the soil and separating the debris. Next, the Separator Tines sift and bury rock and other large debris below the prep surface. Next, the Distribution Blade carries the sifted soil and distributes it evenly across the working surface. And the Perforated Roller creates a pocketed surface for seed and presses small debris below grade. Soil Cultivator & Primary Seeder The new Ventrac Soil Cultivator and Primary Seeder attachments are the pinnacle of lawn seeding, and work as a team to provide the most accurate and consistent lawn install results on the market. Ideal applications for the Soil Cultivator and Seeder are large acreage turf installs, housing complexes, new home construction, and golf and sports field renovations. 1. Cultivator Tines Pulverize soil and separate debris from soil 2. Separator Tines Sift and buries rocks and other large debris below prep surface 3. Distribution Blade Carries sifted soil and distributes eve
Contactez le concessionnaire pour le prix
The KL480 Tiller is designed for easy preparation of gardens and yards. This power-driven front-end attachment allows the operator to easily monitor the Tiller's performance. Designed with the Ventrac Mount System, the Tiller can be attached in a minute or less and comes with a stand for storing the Tiller when not in use. A number 80 chain in an enclosed final drive is lubricated for heavy-duty performance. Skid shoe adjustments facilitate cutting depth. Twenty-four high carbon steel tines are sequentially spaced to provide smooth and efficient tillage.
Contactez le concessionnaire pour le prix
The KY400 Trencher is capable of trenching up to 40 inches (102 cm) in depth with a 5½ inch (14 cm) wide cut. It is designed with dual Push-N-Pull cylinders to assure positive boom control for digging, boom lift, and transport. The terminator/cup combo chain offers carbide cutting tips for excellent cutting performance in a variety soil conditions. Digging teeth bolt onto the chain for easy replacement. The KY400 attached to a VENTRAC 4000 Series tractor gives the operator the ability to maneuver into hard-to-reach locations without damaging the turf like a traditional track unit would.
Contactez le concessionnaire pour le prix
The KC220 Stump Grinder features 18 replaceable heavy-duty carbide cutting teeth on a large 22" rotor for removing large or small stumps. Cutting action is controlled with the forward and reverse motion using the tractor's hydrostatic drive. The Stump Grinder features offset, out-front operation to provide excellent visibility resulting in better performance and efficiency. An increased rotor speed of 1300 RPM equates to a faster tip speed and more significant amounts of material removed with each pass. In addition, with an increased cutting depth of 8 inches, stumps are removed faster than ever. The new material blade, operated by the hydrostatic hand controls, helps push material away from the working area to uncover portions of the stump that needs to be removed. The stump grinder works in a sideways orientation, making this attachment's operation more intuitive, faster, and with an easier learning curve. In addition, set-up and installation on the tractor are easy, and an operator can quickly become a pro at using this attachment effectively. Combined with the 4520 Ventrac tractor, the Stump Grinder is an agile, powerful, turf-friendly mobile unit for lawns, golf courses, parks, and municipalities.
Contactez le concessionnaire pour le prix
Ventrac KD Power Angle Blades have working widths of 48, 60, and 72 inches (122, 152, 183 centimeters). All control functions are performed with the S.D.L.A. control for raising and lowering the blade or angling it left or right. Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways. The blades can be operated in a trip position for plowing or in a locked position for digging into material. Ventrac Power Angle Blades are versatile, labor-saving attachments designed for any number of jobs. From grading, leveling, and backfilling ground to plowing snow, moving material, or cleaning an area, the Ventrac KD series blades are up to the task.
