1987,Ford L9000 t/a Gravel truck,14’ Gravel box,Cummins NTC 350 dsl eng,9 spd Eaton Road Ranger trans,Flip back tarp,Spreader chains,Rear hitch,Rear air supply,11R24.5 rubber,12,000 lbs front axle,38,000 lbs rear axle,598,058 showing,VIN: 1FDYU90W6HVA32316
Voir la vente aux enchères
28 900$ CAD / 20 628$ USD
1996 MACK CH613 Tandem Axle Gravel Truck • Mack E7 12.0L 6 cylinder 430 HP diesel engine • Eaton Fuller 15 speed manual transmission • Air Ride Suspension • Heat & A/C • PTO equipped • Pintel hitch w/ air • 24 Ft body length • 52,000 LBS GVWR • 185 inch wheelbase • Steel box • 14 Ft x 53 inch x 8 Ft box dimensions • End dump • Manual tarp • Steel wheels • 11R22.5 tires STK# 064276 Heavy trucks and trailers available. Call or text Paul to discuss further at 780- 656-5808 Our Hammerstrap dealership is located near Waskatenau, AB and is an AMVIC licensee.
175 000$ CAD / 124 502$ USD
High lift tailgateLangfab air tarp systemTrans - Mack mDRIVE-HD 14 speed22.5 x 13.00 aluminum front rimsFull LED body lighting20000 lbs front axleDual vertical straight exhaust stacks turned outLangfab dump box46000 lbs rear axle11R24.5 rear tires445/65R22.5 front tiresEngine - Mack MP8-445C 445hp1/4" Hardox 450 floor111 gallon aluminum left hand fuel tank218" wheelbaseChampion slate grey button tucked interior24.5 x 8.25 aluminum rear rims3.56 ratioSnow Imron elite exterior36" high Hardox 450 walls
115 000$ CAD / 81 816$ USD
Engine - Ford 7.3L V8 335hp10 000 lbs front axle295/75R22.5 tiresWhite exterior with grey boxGrey interior60 gallon gas tank15T C-hook hitchTrans - 6 speed automatic194" wheelbase22.5 x 8.25 steel rims17 500 lbs rear axle13' 9" Voth aluminum dump body6.5 axle ratio
184 900$ CAD / 131 545$ USD
KMS: 260,51532" Sleeper20 foot box20,000lb front axle: DA-F-20Engine: Detroit DD16 560HP385/65r22.5 Front Tires 6511r24.5 Rear Tires: NEWHRS: 11,169AMVIC licensed dealerDual Steering boxes2015 Western Star 4900 Tri Drive Dump Truck with 20 foot box4-30 RatioRecent CVIPTransmission: Eaton 18 speed. (Transmission and clutch replaced Jan-2023277 WheelbaseRear Axle: 69,000lb RZ-69-166 R-SRS
68 800$ CAD / 49 108$ USD
articulating rock truck,30 tons,Cummins 300hp,runs good, meter reads 11600 hours
Contactez le concessionnaire pour le prix
Transmission Failed, Cummins QSM11-C Engine, Hours 10,509
25 000$ CAD / 17 844$ USD
moteur caterpillar, transmission 8ll, reservoir 3000 gallons
112 900$ CAD / 80 585$ USD
Very nice Kenworth T800 dump truck. 18 speed transmission, lockers, power windows, heat, A/C, radio, heated box and hyd. roll tarp. 46,000lbs rears, 20,000lbs front, 19,841 lbs steering lift axle, All the tires are in excellent condition. 616,000 kms. ready to go to work. Financing and delivery available. Contact Hunter.
16 499$ CAD / 11 738$ USD
Payments as low as $52.25/week for 120 Months at 8.99% 0% Finanacing options available reach out today for more details * Pricing that is posted in cash price* Wacker Neuson's DT08 track dumper with its compact dimension and precision control can be maneuvered with pin-point accuracy along any surface. This Wacker track dumper, with its 1,764 lb. (800 kg) payload and width of only 31 in. (79 cm), make the DT08 ideal for a wide range of jobsite applications. The DT08 is powered by a Honda gasoline engine and comes with a front tip skip. Book your appointment with us today and give this unit a try to see how strong and easy a Wacker Neuson is to use. See you soon! The hydrostatic drive provides easy and comfortable operation - no need to change gears Suspension-mounted rollers compensate for uneven ground and provide for a smoother ride on rough terrain and over curbs or steps The rubber track and the optimum weight distribution reduce the ground pressure and prevent damage to delicate surfaces. Compact dimensions are ideal for confined areas and can fit through narrow garden gates and doorways, making them an excellent choice for landscape, concrete, demolition and residential applications. Optimal cooling system allows for applications in higher temperatures
17 999$ CAD / 12 805$ USD
Payments as low as $52.25/week for 120 Months at 8.99% Financing starting as low as 3.99% Financing Rates: 3.99% Fixed Rate / 24 months 4.99% Fixed Rate / 36 months 5.99% Fixed Rate / 48 months 6.74% Fixed Rate / 60 months * Pricing that is posted in cash price* Wacker Neuson's DT08 track dumper with its compact dimension and precision control can be maneuvered with pin-point accuracy along any surface. This Wacker track dumper, with its 1,764 lb. (800 kg) payload and width of only 31 in. (79 cm), make the DT08 ideal for a wide range of jobsite applications. The DT08 is powered by a Honda gasoline engine and comes with a front tip skip. Book your appointment with us today and give this unit a try to see how strong and easy a Wacker Neuson is to use. See you soon! The hydrostatic drive provides easy and comfortable operation - no need to change gears Suspension-mounted rollers compensate for uneven ground and provide for a smoother ride on rough terrain and over curbs or steps The rubber track and the optimum weight distribution reduce the ground pressure and prevent damage to delicate surfaces. Compact dimensions are ideal for confined areas and can fit through narrow garden gates and doorways, making them an excellent choice for landscape, concrete, demolition and residential applications.
16 499$ CAD / 11 738$ USD
Payments as low as $52.25/week for 120 Months at 8.99% Financing starting as low as 3.99% Fianancing Rates: 3.99% Fixed Rate / 24 months 4.99% Fixed Rate / 36 months 5.99% Fixed Rate / 48 months 6.74% Fixed Rate / 60 months * Pricing that is posted in cash price* Wacker Neuson's DT08 track dumper with its compact dimension and precision control can be maneuvered with pin-point accuracy along any surface. This Wacker track dumper, with its 1,764 lb. (800 kg) payload and width of only 31 in. (79 cm), make the DT08 ideal for a wide range of jobsite applications. The DT08 is powered by a Honda gasoline engine and comes with a front tip skip. Book your appointment with us today and give this unit a try to see how strong and easy a Wacker Neuson is to use. See you soon! The hydrostatic drive provides easy and comfortable operation - no need to change gears Suspension-mounted rollers compensate for uneven ground and provide for a smoother ride on rough terrain and over curbs or steps The rubber track and the optimum weight distribution reduce the ground pressure and prevent damage to delicate surfaces. Compact dimensions are ideal for confined areas and can fit through narrow garden gates and doorways, making them an excellent choice for landscape, concrete, demolition and residential applic
